Wizard Products List
next product in the category «Floor coatings» "Синтего-UR.01 Премиум"→

Polyaspartic composition "Sintego-PA.Finish"

Polyaspartic composition "Sintego-PA.Finish" is a two-component formula based on polyaspartic polyurea elastomers developed specially for the making of high-strength industrial floors of the all-purpose type. It also suits to create a waterproofing protection for the objects used for different purposes.
Contact Person
Sales Department
InterGazSintez

(06453) 6-21-02

(050) 348-77-47

com@igs.ua

Application and Features

The covering is distinguished by its fastness, solidity, moderate flexibility, high resistance towards abrasive wear and influence of chemical agents such as oils, petroleum products,salts. The covering is also resistant to shock and vibratory deformations. The covering is frostproof, capable of enduring considerate cyclic temperature drops. The composition is used for the floor-making and painting of walls in industrial premises of food industry enterprises, business and public catering enterprises, hotels, exhibition halls, entertainment organizations, service centres and parkings, storehouses and utility rooms. The composition is used as primary and secondary waterproofing seamless membranes.

 

 

 

 

 

 

 

 

 

 

MEASURE'S DENOMINATION AND UNITS 

 VALUE OF A CHARACTERISTIC 

Dry residue  

100%

Shore hardness   

75D

Percentage elongation 

15%

Pot life after mixing of the components, minutes, no less than 

12-18

Rupture strength, MPa 

625

Abrasive resistance, mg losses, CS-17

66,8

Brilliancy, 60°, spec.

90+

Direct, opposite influence 

>100 in-lbs

Content of volatile organic compounds, g/l 

0

Theoretical discharge at 0.3 mm thickness, kg 

0,360

Time till the aftertack, hours  

1,5-2

Time of complete solidification at 25°С, hours

4-5 

 

Instructions for use

Degrease surface of the metal up to degree 1 according to GOST standard 9.402-2004.
Clean of scale, rust and remnants of the old paint up to degree 2 according to GOST standard 9.402-2004 (Sa 2.5 or Sa 2 according to ISO 8501-1:2007).
Mechanical cleaning is allowed according to GOST standard up to degree 3 (St 3 or St2 according to ISO 8501-1:2007). Remove dust.

Packaging, transportation and storage

Packaging of the components of the covering is produced in accordance with GOST standard 9980.3.
Storage of the components of the covering is realized in accordance with GOST standard 9980.5.
Warranty storage time is 12 months since the date of production.

Occupational health and safety

The components of the covering do not contain highly inflammable liquids and solvents. Use in well-ventilated rooms only. Avoid inhalation, getting into eyes and on the skin surface.