Wizard Products List
next product in the category «Concrete Waterproofing» "Синтего-ПУ.Finemastic"→

Polymeric two-component mastic "Sintego-MAST.02"

Mastic "Sintego-MAST.02" is a two-component composition produced by shifting polymeric and bituminous formulas in the specified proportion.
Contact Person
Sales Department
InterGazSintez

(06453) 6-21-02

(050) 348-77-47

com@igs.ua

Application and Features

  • The mastic is intended for making monolitic roofings, repair of roof coverings, waterproofing and corrosion protection of building structures of metal and concrete.
  • The mastic-based covering is elastic, possesses good waterproofing characteristics and low inflammability.
  • The material is applied to concrete, metal, wooden and ceramic, bitumen surfaces, and ruberoid.
  • The material is applied by the method of airless spraying, by a brush, or by a pallet. To a horizontal surface it can be applied by the method of filling using spiked roller.

Наименование показателя и единицы измерения

Композиция

Внешний вид материала

Вязкая однородная масса

Степень перетира, мкм, не более

150

Массовая доля нелетучих веществ, %, не менее

36±3

Вязкость по ВЗ-4, с, не более

400

Внешний вид готового покрытия

гладкая полу-матовая

Расход на 1 слой, кг/м², не более

1

Соотношение компонентов при смешивании (по массе)

Жизнеспособность при температуре (20±2) °С, ч, не менее

8

Instructions for use

The components of the mastic should be mixed till homogeneous state before application.
The base should be properly dusted, should not have significant irregularities, deep dents and cavities.
Application of the mastic is conducted at the temperature of the ambient air not lower than 5 0C.
Application in several layers is possible, provided the interlaminar drying time is no less than 3 hours.
One-time consumption of the composition per each layer should not exceed 1 kg per 1 m2.
vulcanization of the film is conducted without atmospheric precipitations.

Packaging, transportation and storage

Packaging of the components of the covering is produced in accordance with GOST standard 9980.3.
Storage of the components of the composition is realized in accordance with GOST standard 9980.5.
In case of keeping of the components of the mastic at a temperature lower than 5 0C the product is to be warmed up at a temperature of 40-50 0C till the fluent state before application.
Warranty storage time is 6 months since the date of production.

Occupational health and safety

The components of the mastic are inflammable materials. Use in well-ventilated rooms only. Avoid inhalation, getting into the eyes and on the skin surface.