Modified epoxy coat-enamel "Sintego-EF.01"TUU: 24.6-32803942-075:2010
Application and Features
Designed for durative anticorrosive protection of large sized structures operating in atmospheric conditions of microthermal, polar and megathermal climate.
- Rapid drying
- Enhanced solidity of coating
- High decorative qualities
- Chemical stability excelling alkyd enamels.
- Used for primary and maintenance painting bridges, steel and ferroconcrete structures, cisterns, chemical and petrochemical industry machinery, port and near port structures, sea crafts and river crafts, travelling trains and trucks.
- Color according to RAL Classic.
|Measure and measure unit||Measure value|
|Appearance||Smooth semigloss coating without impurities, craters or pores|
|Nonvolatile substances mass fraction, %, no less than||65-75|
|Relative viscosity according to V-3 246 viscometer (nozzle diameter 4 mm) under (20±0,5) °С, seconds||100-120|
|Grit, um, no more than||15|
|Density under (20±0,5)°С, g/cm3||1,15-1,5|
|Adhesion, points, no more than||1|
|Elasticity when bent, mm, no more than||1|
|Resistance to impact, cm, no less than||50|
|Recommended layer thickness, um||60-120|
|Drying time of a 30 um layer to degree 3 under 25°C, hours, no more than||0,5|
|Hiding power of dry film, g/m2, no more||100|
|Hardness according to TML pendulum device (pendulum А), standard units, no less than||0,25|
|Tolerance to static exposure to water under 20°С, days, no less than||15|
|Tolerance to static exposure to 0.5 % detergent solution under 20°С, hours, no less than||3|
|Preliminary consumption of material using non-air spraying devices, thickness of dry coating being 60 um, kg/m²||0,160|
- Instructions for use
Requirements for surface preparation:
Cleaning (SA 2.5, ST2, ST3; according to ISO 8501-1).
How to merge and apply:
Stir the contents of package throughly. If necessary, coat-enamel can be diluted with dissolvent to desired viscosity. For diluting and dissolving use solvent or xylol.
Acceptable temperature range for applying coat-enamel is 5-40°С, relative humidity up to 75%
This coat-enamel does not require priorly padding of surface.
This coat-enamel does not necessarily require a final layer.
Apply material to priorly prepared surface (clean from loose rust, dist. dirt and oil). Use air and non-air spraying devices, a roller or brush.
- Packaging, transportation and storage
Packaging is performed according to state standard 9980.3.
Storage is performed according to state standard 9980.5.
Warranty period 12 months after manufactured.
- Occupational health and safety
Inflammable. Apply in well-ventilated premises only. Avoid inhaling. Keep away from eyes and skin.