Wizard Products List
next product in the category «Tanks protection» "Синтего-ЭГ"→

Modified epoxy coat-enamel "Sintego-EF.01"

TUU: 24.6-32803942-075:2010
"Sintego-EF.01" is a modified one-component epoxy coat-enamel with a high solid residue ratio. Contents include phosphating additives that enhance anticorrosive qualities of coating.
Contact Person
Sales Department
InterGazSintez

(06453) 6-21-02

(050) 348-77-47

com@igs.ua

Application and Features

Designed for durative anticorrosive protection of large sized structures operating in atmospheric conditions of microthermal, polar and megathermal climate.

Peculiarities:

  • Rapid drying
  • Enhanced solidity of coating
  • High decorative qualities
  • Chemical stability excelling alkyd enamels.
  • Used for primary and maintenance painting bridges, steel and ferroconcrete structures, cisterns, chemical and petrochemical industry machinery, port and near port structures, sea crafts and river crafts, travelling trains and trucks.
  • Color according to RAL Classic.
Measure and measure unitMeasure value
Appearance Smooth semigloss coating without impurities, craters or pores
Nonvolatile substances mass fraction, %, no less than 65-75
Relative viscosity according to V-3 246 viscometer (nozzle diameter 4 mm) under (20±0,5) °С, seconds 100-120
Grit, um, no more than 15
Density under (20±0,5)°С, g/cm3 1,15-1,5
Adhesion, points, no more than 1
Elasticity when bent, mm, no more than 1
Resistance to impact, cm, no less than 50
Recommended layer thickness, um 60-120
Drying time of a 30 um layer to degree 3 under 25°C, hours, no more than  0,5
Hiding power of dry film, g/m2, no more 100
Hardness according to TML pendulum device (pendulum А), standard units, no less than 0,25
Tolerance to static exposure to water under 20°С, days, no less than 15
Tolerance to static exposure to 0.5 % detergent solution under 20°С, hours, no less than 3
Preliminary consumption of material using non-air spraying devices, thickness of dry coating being 60 um, kg/m² 0,160
Instructions for use

Requirements for surface preparation:
Steel
Cleaning (SA 2.5, ST2, ST3; according to ISO 8501-1).

How to merge and apply:
Stir the contents of package throughly. If necessary, coat-enamel can be diluted with dissolvent to desired viscosity. For diluting and dissolving use solvent or xylol.
Acceptable temperature range for applying coat-enamel is 5-40°С, relative humidity up to 75%
This coat-enamel does not require priorly padding of surface.
This coat-enamel does not necessarily require a final layer.
Apply material to priorly prepared surface (clean from loose rust, dist. dirt and oil). Use air and non-air spraying devices, a roller or brush.

Packaging, transportation and storage

Packaging is performed according to state standard 9980.3.

Storage is performed according to state standard 9980.5.

Warranty period 12 months after manufactured.

Occupational health and safety

Inflammable. Apply in well-ventilated premises only. Avoid inhaling. Keep away from eyes and skin.